520R-MX PCIe Card with Intel Stratix 10 MX FPGA
PCIe FPGA Card 520R-MX Stratix 10 FPGA Board with HBM2 and 480Gbps Optical Input Optimized for sensor processing applications with massive real-time data ingest requirements
FPGA Server
TeraBox 1400DN
Extreme Density 1U FPGA Server
Obsolete Product Notice:
This is an obsolete product and is no longer available for purchase. Contact BittWare for a recommended newer product.
Overview
At the extreme of FPGA server density, the TeraBox 1400DN gives the highest level of compute and network capability in a 1U chassis. This server provides up to 3.2 Terabits/second of I/O and the power of 4 of our largest Achronix Speedster7t, Intel Stratix 10 or Xilinx UltraScale+ FPGAs.
This innovative product is made possible through a powerhouse partnership of integrated technologies from Intel, Dell EMC and BittWare.
Key Features
Up to
32 QSFPs
for 64x 100G or 256x 10/25G
4U
4U FPGA server
Support for BittWare’s full range of FPGA cards
Four Achronix Speedster 7t, Intel Stratix 10, or Xilinx UltraScale+ FPGA cards in a 1U rackmount chassis
Chassis Key Specs
- 1U depth, 36.46 in (92.62 cm)
- Processor: Intel® Xeon® Scalable Processors
- Memory: 24x DDR4 DIMMs
- Storage: IDSDM or Internal M.2 Boot Module (2 x M.2)
Slots: 4x PCIe Gen3 x16 - Power supply: 2400W redundant
FPGA Cards
The TeraBox 1400DN supports up to four dual-slot BittWare PCIe FPGA cards. Choose from a variety of cards based on the Speedster 7t, Stratix 10, or UltraScale+ FPGAs. System specs will vary greatly, depending on the FPGA card you select. For example, with four BittWare UltraScale+ PCIe cards, which support up to 512 Gbytes of DDR4 per card, the chassis can support as much as 2 Terabytes of DDR4 on the FPGA cards in 16 banks. With four Stratix 10 cards, each chassis supports 10 million logic elements.
Dell EMC C4140 1U Server
Dell’s C4140 rackmount 1U server featuring dual Intel Skylake processors is the ideal platform to unleash the energy-efficient acceleration of BittWare’s FPGA cards. This FPGA-optimized 1U server delivers unrivaled performance density and value for a range of compute-intensive applications, including machine learning.
The TeraBox Advantage
Choosing a TeraBox FPGA server means knowing you are getting a pre-configured and tested solution. This includes setup and installation of your FPGA cards and associated hardware, your choice of operating system, and development tools. Your TeraBox arrives ready for use—giving your team more time for development and deployment.
Data Sheet and Specifications
Example System Configuration
The TeraBox 1400DN supports many of BittWare’s Achronix, Intel, or Xilinx FPGA-based PCIe cards. The table below lists system totals when populated with four cards*:
| FPGA | Cards in Server | Memory | I/O | Processing | |
| S7t-VG6 | Speedster 7t | 4 | 32 banks GDDR6 (up to 32 GBytes) | 1.8 Terabit/sec 24x 100/50/40/25/10 GbE | 2.75 million 6-input lookup tables (LUTs) 750 Mbits embedded RAM |
| 520N-MX | Stratix 10 MX | 4 | 8 banks DDR4 (up to 1 Terabyte) 16 banks QDRII+ (up to 2.3 Gbits) | 1 Terabit/sec 16x 100/50/40/25/10 GbE | 8.4 million system logic elements 64 GBytes HBM2 |
| XUP-VV8 | UltraScale+ VU13P | 4 | 16 banks DDR4 (up to 2 Terabytes) 32 banks QDRII+ (up to 9.2 Gbits) | 2.3 Terabits/sec 32x 100/50/40/25/10 GbE | 15.2 million system logic cells Up to 49.152 DSP slices |
Server Configurations
Low
- (2) Intel Xeon Silver 4214 Processors (2.2GHz, 12C/24T)
- 48GB DDR4
- (1) 1.6TB NVMe Flash
- BOSS controller card with (2) M.2 480GB sticks (RAID1)
- 2400W Redundant Power Supplies (250V)
Medium
- (2) Intel Xeon Gold 5220 Processors (2.2GHz, 18C/36T)
- 96GB DDR4
- (1) 1.6TB NVMe Flash
- BOSS controller card with (2) M.2 480GB sticks (RAID1)
- 2400W Redundant Power Supplies (250V)
High
- (2) Intel Gold 6244 Processors (3.6GHz, 8C/16T)
- 192GB DDR4
- (1) 1.6TB NVMe Flash
- BOSS controller card with (2) M.2 480GB sticks (RAID1)
- 2400W Redundant Power Supplies (250V)
Ultra
- (2) Intel Xeon Platinum 8280 Processors (2.7GHz, 28C/56T)
- 768GB DDR4
- (1) 1.6TB NVMe Flash
- BOSS controller card with (2) M.2 480GB sticks (RAID1)
- 2400W Redundant Power Supplies (250V)
- Minimum order quantity required. Contact BittWare for details.
Interested in Pricing or More Information?
Our technical sales team is ready to provide availability and configuration information, or answer your technical questions.
